Answers for Sound and Vibration exmples

Hope this help the students who study sound and vibration but don't have Chegg ID.
Questions
1.  What is the change in sound pressure level from a uniform radiating source, if
(a) the intensity is doubled? (b) the pressure is doubled?
(c) two more identical sources are added in locations equivalent to the first

2. Calculate the % of acoustical energy that must be removed to reduce a given SPL by 1dB; by 5dB; by 10dB

3.  80dB + 76dB = ?

4. You have available to you two pump styles : pump A at 80 l/s produces a 100 dBA SPL at a given point, and pump B at 40 l/s produces 90dBA under the same condition. From a noise control standpoint, what combination of pumps would be the most acceptable for developing a flow rate of 160 l/s?

5. The noise level from a power station with 10 identical transformers measured near some residential property line was found to be 54dB. The maximum permitted in this area is 51dB at night. How many machines could be used during the night?

6. In a textile mill, certain workers spend 3 hours a day in a noise environment of 90dBA, 1.5 hr in an environment of 92dBA, 1hr in an environment of 95dBA and 2.5hr outdoors where the noise level is 60dBA. Is the noise exposure of these workers within the permissible limit? Calculate the Leq.

7. A machine produces a noise having the following octave band spectrum:
 
What is the A weighted SPL produced?

8.  An operator in a machine room is exposed to noise due to five machines. The SPL produced by each machine individually at the operator's working area is as shown below.
 
From the details given in the following table of the operating cycle of each machine determine Leq.
Leq=90.57dB

 Answers







댓글

댓글 쓰기

이 블로그의 인기 게시물

아두이노 - 안드로이드 블루투스 연결 및 실시간 그래프 표현 (1)

하루키식 글쓰기 연습-에어맥스 97